How much is the feed pellet machine, the precautions for use

Time:2019-05-23 16:19
Production of agricultural machinery supply "Yuyu rich brand" feed pellet machine, multi-function feed pellet machine, flat mold feed pellet machine, straw feed pellet machine, small feed pellet machine, and other equipment. Feed pellet machine (also known as pellet feed machine, feed granulator, pellet feed molding machine) is a feed granulation equipment. It is a feed processing machine that directly compresses granules with pulverized materials such as corn, soybean meal, straw, grass, rice husk, and peanut husk. How to reduce the cost of feed and meet the nutritional needs of various livestock and poultry has become an urgent problem for the majority of farmers and feed industries. The primary issue.
First, use: 1. This machine is mainly suitable for rabbit industry, fish, duck, chicken, shrimp, pig, cattle, sheep and industrial pellet processing. Widely used in industrial, plastic pellets, organic fertilizer particles, wood pellets, etc.
Second, the characteristics: 1. Simple structure, wide adaptability, small footprint, low noise. 2. The powdery feed/grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage. 3. Chickens, ducks, fish, etc. can obtain higher economic benefits than mixed powdered feed. 4. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients. 5. The particle formation process can degenerate the pancreatic enzymes in grains and beans, reduce the adverse effects on digestion, kill various eggs and other pathogenic microorganisms, and reduce various insects and digestive systems.
Matters needing attention: 1. When processing granules, check whether there are stones, iron blocks, metal objects, hard materials and other foreign materials in the raw materials entering the machine, causing damage to the internal pressure roller. 2. When granulating, the processor should stand by the machine to avoid injury to the material when the feed is processed. 3. When the machine is working, it is forbidden to introduce the feeding by hand, stick or stick. 4. If there is abnormal noise inside the machine, turn off the switch, and check when the machine stops running after stopping. 5, prohibit children, the elderly and do not understand the performance of the machine, the operator will not use the machine, so as not to cause unnecessary trouble.
Over the years, a large amount of straw burning has caused great pollution and wasted valuable renewable resources. The biomass straw granule machine can compress corn straw and other crop straw into biomass pellet fuel, high-density fuel, high calorific value, full of fuel, low cost, convenient use, clean and hygienic, convenient for transportation and storage, etc. Heating furnaces, agricultural greenhouses, boilers and power generation fuels can also be used as biogas production, raw material waste, feed and high-density boards, with high social and economic benefits. The status of straw as a traditional fuel in rural areas has been gradually replaced by coal, liquefied gas and electromagnetic technology. The problem of stumps and burning of crops after harvesting is becoming more and more serious. Crop straw is an excellent biomass energy, and such treatment is not considered first. The method is a huge waste of resources, and the environmental pollution caused by combustion cannot be ignored. At present, the comprehensive utilization technology of crop straw mainly includes: straw papermaking, straw returning, biochemical feed, fertilizer, gasification and carbonization.
In the case of a bad global economic development, China is not immune to the entire large market environment. China's traditional industry feed aquaculture industry has responded to the entire economic environment and made timely mode adjustments to stabilize the development of the feed industry. In recent years, large-scale feed mills have almost suffered losses and bankruptcies. The high cost of feed mills has made it impossible for feed mills to make changes. The processing of feed pellets has become a popular feed processing mode. Every large feed factory is surrounded by small manufacturers to survive with feed processing. These small manufacturers have helped them survive. The small plant has low operating costs and low feed processing costs, but the technical strength is not sufficient; on the contrary, the large feed processing technology of the big factory is mature but the operating cost is too low. Therefore, the feed mill began to cooperate with small peripheral manufacturers to carry out the processing of feed, so that the small feed mills can directly provide technical and formula support to the processing orders. This feed pellet machine processing mode has enabled large feed mills to find shortcuts in terms of cost and profit. It has also helped the development of small businesses around the world, and it is a very effective production method at the moment.